Build-a-Boat / Electric Motor Boat Activity

SKU# 1822-98
$8.48

Type

Conquer the high seas — or your swimming pool — by crafting your own DIY boat! The TeacherGeek building system does what others don't, allowing kids to easily swap and manipulate parts as they try out their latest and greatest boat design. That means kids are really engineering; trying out ideas, seeing what works and what doesn't, and learning all the while!

You need a Phillips-head Screwdriver for this activity pack.
Scroll down to "Things You'll Need" for more info.

Age Range

4
5
6
7
8
9
10
11
12
13
14
15
16
17
18+

Customize this activity for the highlighted ages with tons of free labs and challenges!

This is an educational product and not a toy. Adult supervision is required.

Videos

Documents

Click on the flowchart to view documents from each category.

Go Guide:

Give it to your students and go! This is the essential document to get students started with their Boats.

Go Guide:
English: PDF DOCX
Spanish: PDF DOCX
Start here, build your Boat, and start the Speed Boat Challenge!

Things You'll Need

You're going to need some stuff, but don't sweat it! You probably have it already.

Click a tab below to choose how you will complete this activity - that determines what you'll need.

You're using the activity packs you can purchase on this page?
You're in the right tab!

TeacherGeek Tools

REQUIRED

Screw Driver

Drive screws into holes.

optional

Slip Joint Pliers

Grab nuts, bend
wires, etc.

optional

Multi-Cutter

Cut dowels, strips,
recycling bin items, etc.

optional

Reamer

Ream splines (teeth),
from holes so
dowels spin freely.

optional

Mini Hammer

Tap dowels into
other components.

Other Supplies

  • 2x AA Batteries
  • Tape
  • Recycling Bin Materials (for your boat's hull)
  • Scissors
  • Safety Goggles

Activity Pack Components

What comes with the Build-a-Boat?

The table shows what comes in each single kit. To see what comes in a 10-pack, just multiply by 10.
Component Quantity
#10 25mm Screw 4
#10 Hex Nut 4
AA Double Battery Holder w/ Power Switch & Leads 1
Chip Board - 22 cm x 5 cm (8.5 in x 2 in) 1
Connector Strip 3
Dowel - 30 cm (12 in) 1
Dowel - 15 cm (6 in) 2
Dowel - 10 cm (4 in) 3
Dowel - 8 cm (3 in) 2
Mini Hub Assemby (Red) 1
Perpendicular Block 2
Small 1.5-3V Motor 1
Small 1.5-3V Motor Mount 1
Small Bamboo Project Stick 10
Zip Tie 4

Science, Math & Engineering Standards

TeacherGeek products fit proposals, grants or lesson plans with ease! Explore more resources below:

NGSS Standards Spreadsheet:
PDF DOCX
NGSS standards matrix for all TeacherGeek activities.
ITEEA Standards Spreadsheet:
PDF DOCX
ITEEA standards matrix for all TeacherGeek activities.