Electromagnet Crane 2.0
SKU# 1824-71
Searching for an attractive activity? Look no further! The Electromagnet Crane 2.0 Activity Pack has aspiring engineers learning the low-down on magnetism and linkages as they create and operate their very own electromagnet crane!
Power up the battery magnet and hoist, grab, sort, then build it all over again to complete new challenges. The TeacherGeek build system makes it easy and fun to construct new crane designs, meaning kids will be more excited than ever to get back to the drawing board!
Each Electromagnet Crane 2.0 Activity Pack comes with a Go Guide to help students get started, culminating in a challenge that’ll put their designs to the test. TeacherGeek even offers free downloadable science labs and engineering challenges sure to get students amped to take their cranes to the next level!
Scroll down to "Things You'll Need" for more info.
This activity was recently updated! Check your label to make sure you're on the right page.
Click here to go to the original Electromagnet Crane page! (You're in the wrong place.)
You're in the right place! Scroll down to find documents and videos.
Age Range
Customize this activity for the highlighted ages with tons of free labs and challenges!
This is an educational product and not a toy. Adult supervision is required.
Videos
Documents
Click on the flowchart to view documents from each category.
Go Guide:
Give it to your students and go! This is the essential document to get students started with constructing your Electromagnet Crane 2.0, culminating in the Space Mining Challenge.
|
Go Guide: PDF | DOCX |
Start here! Build your Crane, evolve your design, and begin the Space Mining Challenge! |
Things You'll Need
You're going to need some stuff, but don't sweat it! You probably have it already.
Click a tab below to choose how you will complete this activity - that determines what you'll need.
You're in the right tab!
TeacherGeek Tools
REQUIRED
Screw Driver
Drive screws into holes.
optional
Slip Joint Pliers
Grab nuts, bend
wires, etc.
optional
Multi-Cutter
Cut dowels, strips,
recycling bin items, etc.
optional
Reamer
Ream splines (teeth),
from holes so
dowels spin freely.
optional
Mini Hammer
Tap dowels into
other components.
Other Supplies
- AA Battery (To power your electromagnet)
- Bowl
- Aluminum Foil (optional)
- Any two of: rice, beans, small candies, crumpled paper
- Tape
- Recycling Bin Materials (optional - to incorporate into your design)
Activity Pack Components
What comes with the Electromagnet Crane 2.0?
The table shows what comes in each single kit. To see what comes in a 10-pack, just multiply by 10.| Component | Quantity | |
|---|---|---|
 |
#10 25mm Screw | 8 |
 |
#10 50mm Screw | 3 |
 |
#10 Hex Nut | 10 |
 |
AA Single Battery Holder | 1 |
 |
Connector Strip | 5 |
 |
Dowel - 30 cm (12 in) | 2 |
 |
Hole Plate | 1 |
 |
Mini Hub Screw | 4 |
 |
Perpendicular Block | 5 |
 |
Slide Stop - 8 cm (3 in) | 1 |
 |
Small Rubber Band | 2 |
 |
String - 90 cm (36 in) | 1 |
 |
Wire Roll | 1 |
Science, Math & Engineering Standards
TeacherGeek products fit proposals, grants or lesson plans with ease! Explore more resources below:
|
NGSS Standards Spreadsheet: PDF | DOCX |
NGSS standards matrix for all TeacherGeek activities. |
|
ITEEA Standards Spreadsheet: PDF | DOCX |
ITEEA standards matrix for all TeacherGeek activities. |
