Wind Pump, Wind Turbine/Mill Activity


Single SKU: 1823-18

10 Pack SKU: 1823-19

The Wind Pump harnesses the energy created from wind to pump water. The wind-driven turbine powers a geared transmission that operates a hydraulic pump. This will move water from one level up to another. You will apply many scientific concepts such as calculating work, fluid mechanics, simple machines and aerodynamics.  A stand is necessary. You can purchase either the Bench or Wind Turbine Stand or make one of your own. The blade materials is yours to procure - try recycling bin products like old cardboard or wood.

Note: You can also create a hand operated pump from these TeacherGeek components.

Wind Pump Activity Document Downloads

Note: The TeacherGeek Wind Pump activity no longer uses 20cc syringes in its build. The yellow 14mL cylinders work in much the same way, while remaining school-friendly. There is not cutting or assembly required for the 14mL cylinder - simply attach the piston with the hardware as outlined in the Build Guide and go! 

Design and Engineering Labs and Activities

 Other Useful Resources

On the Web...

[powr-multi-slider label="pump"]

TeacherGeek Tools You'll Need

What tools will you need to do this activity?


Process Description

Recommended Tool 

Alternate Tool


Cutting dowels, strips, recycling bin items, etc.


Saw, Pruning Shears


Change splined holes in components from press fit (dowels press and stay) to loose fit (dowels are able to slide and rotate).


#3 Drill Bit and Drill


Tighten and loosen screws



Holding and Pulling

Hold nuts, pull apart components



Sets of tools can be found here.

Make your Wind Pump or Wind Turbine even better by incorporating recycling bin material.

Wind Pump Components

What's in the Wind Pump, Wind Turbine/Mill Activity?

Component: 10pk Quantity: Single Quantity:
13ml Cylinder Barrel 10 1
13ml Cylinder Plunger 10 1
13ml Cylinder Piston 10 1
#6 x 1/2in Truss Head Screws 30 3
300mm-Slide Stop Material 3 1/3 (100mm)
#10 Hex Nuts 80 8
#10 Fender Washers 40 4
10-24x1 Screws 40 4
#10 Locking Hex Nuts 10 2
10-24x2 Screws 20 2
Clips 60 6
Wheels 20 2
Perpendicular Blocks 20 2
Check Valves 20 2
T-Connectors 10 1
5mmx300mm Dowels  120 12
Vinyl  Tubing 100ft. 1 1
Hole Plates 20 2
40pcs Mixed Gear Set 1 4pc (one of each size)


This is an educational product and not a toy. It is intended for use by ages 9 and above with adult supervision. 

Science, Math & Engineering Standards

TeacherGeek products fit proposals, grants or lesson plans with ease! Explore more resources below:

Next Generation Science Standards
NGSS Standards Download - PDF
NGSS Standards Spreadsheet - Editable /Searchable Excel Sheet

International Technology & Engineering Educators' Association Standards
ITEEA Standards Download - PDF
ITEEA Standards Spreadsheet - Editable/Searchable Excel Sheet

Customer Reviews

No reviews yet Write a review